PID control Temperature Humidity Chamber Environmental Test Equipment
Downloadable Information
Thermal Shock Chamber.pdf
UV Accelerated Weathering Tester.pdf
Water spray test chamber.pdf
Dust Chamber.pdf
Haida IPX1 - IPX8 Rain Test Chamber.pdf
Temperature and humidity chamber.pdf
Operation Manual for UV Aging Test Chamber - Contr...
Performance
Environment testing chamber can simulate both temperature and humidity. Controlled humidity from 10% RH to 95% RH can be maintained within the dry-bulb temperature range of +10°C to +85°C, limited by a 6°C dew point. For lower dew point conditions (low RH or relative humidity at low dry-bulb temperatures), you will need dry air purge or GN2 (gaseous nitrogen) purge. See the humidity range chart on the specification page of each temperature-humidity chamber for humidity range limits.
Questions for Performance Evolution Request:
System & Performance Options
- Low and Ultra-Low Humidity Extends the humidity control range. (Normal Humidity Range Diagramed)
- Water-cooling system.
- Dry Air Purge keeps moisture in the chamber extremely low by purging with -40 °C. Compressed air supply required
- Additional shelves, 50 Kg loading
- Cable ports with flexible silicone plug, 50 , 100, 150mm or customer specific diameters
Specifications :
Range – 70 to 150°C
| Temp/Humidity | HD-E702-100-7 | HD-E702-150-7 | HD-E702-225-7 |
| | HD-E702-408-7 | HD-E702-800-7 | HD-E702-1000-7 |
| Temp-only | HD-E702-100T-7 | HD-E702-150T-7 | HD-E702-225T-7 |
| | HD-E702-408T-7 | HD-E702-800T-7 | HD-E702-1000T-7 |
| Temperature Range: | -70°C ～150°C |
| Cooling Capacity | ~ 2.5 kW at -50°C | ~ 3 kW at -50°C | ~ 5 kW at -50°C |
| | ~ 6.5 kW at-50°C | ~ 8.5 kW at -50°C | ~ 9 kW at - -50°C |
| Heating System | ~ 5 kW | ~ 5 kW | ~ 5.5 kW |
| | ~6.5 kW | ~ 8.5 kW | ~ 9 kW |
| Temperature Fluctuation: | ±0.5°C |
| Temperature Gradient: | ±0.5°C～±0.2°C |
| Heating Rate†: | ≥3℃ / min average ( Advance model 5 – 15 ℃ / min) |
| Cooling Rate†: | ≥1℃ / min average (Advance model 5 - 15℃ / min) |
| Humidity Range: | 10％～95％RH (Ref to Normal Humidity Range Diagramed) |
| Humidity Fluctuation: | ±1.5％RH～±2.0％RH |
| Humidity Gradient: | ±3％RH |
| Dimensions |
| Workspace dimensions
(WxDxH)mm: | 500x400x500 HD-E702-100 | 600x500x500 HD-E702-150 | 750x500x600 HD-E702-225 |
| | 850x650x800 HD-E702-800 | 1000x1000x800 HD-E702-800 | 1000x1000x1000 HD-E702-1000 |
| Exterior dimensions
(WxDxH)mm: | 1400x850x1050 | 1500x950x1050 | 1650x950x1150 |
| | 1750x1050x1350 | 1900x1450x1350 | 1900x1450x1550 |
| Site Requirements |
| Electrical Supply: | 208V 3Ø 60Hz or 230V 3Ø 60Hz (customer specific) |
| Humidity Water | Distilled water |
| Condensate Drain: | 1/2" hose connection (gravity drain) |
Range – 40 to 150°C
| Temp/Humidity | HD-E702-100-4 | HD-E702-150-4 | HD-E702-225-4 |
| | HD-E702-408-4 | HD-E702-800-4 | HD-E702-1000-4 |
| Temp-only | HD-E702-100T-4 | HD-E702-150T-4 | HD-E702-225T-4 |
| | HD-E702-408T-4 | HD-E702-800T-4 | HD-E702-1000T-4 |
| Temperature Range: | -40°C ～150°C |
| Cooling Capacity | ~ 2 kW at -20°C | ~ 2.5 kW at -20°C | ~ 4.5 kW at -20°C |
| | ~ 5.5 kW at-20°C | ~ 8 kW at -20°C | ~ 8.5 kW at - -20°C |
| Heating System | ~ 5 kW | ~ 5 kW | ~ 5.5 kW |
| | ~6.5 kW | ~ 8.5 kW | ~ 9 kW |
| Temperature Fluctuation: | ±0.5°C |
| Temperature Gradient: | ±0.5°C～±0.2°C |
| Heating Rate†: | ≥3℃ / min average ( Advance model 5 – 15 ℃ / min) |
| Cooling Rate†: | ≥1℃ / min average (Advance model 5 - 15℃ / min) |
| Humidity Range: | 10％～95％RH (Ref to Normal Humidity Range Diagramed) |
| Humidity Fluctuation: | ±1.5％RH～±2.0％RH |
| Humidity Gradient: | ±3％RH |
| Dimensions |
| Workspace dimensions
(WxDxH)mm: | 500x400x500 HD-E702-100 | 600x500x500 HD-E702-150 | 750x500x600 HD-E702-225 |
| | 850x650x800 HD-E702-800 | 1000x1000x800 HD-E702-800 | 1000x1000x1000 HD-E702-1000 |
| Exterior dimensions
(WxDxH)mm: | 1400x850x1050 | 1500x950x1050 | 1650x950x1150 |
| | 1750x1050x1350 | 1900x1450x1350 | 1900x1450x1550 |
| Site Requirements |
| Electrical Supply: | 208V 3Ø 60Hz or 230V 3Ø 60Hz (customer specific) |
| Humidity Water | Distilled Water |
| Condensate Drain: | 1/2" hose connection (gravity drain) |
Features:
Stainless steel exterior
Full thermal break around doorframe
One 50mm (2") diameter cable port on left, with flexible silicone plug
Three levels of overheat protection
115V main power for BTL-433 model
High performance and quiet operation (65 dBa)
Easy lift-off service panels, electrical access on left
Standard Features:
- Stainless# 304 steel for interior
- Paint steel for exterior
- Foam-insulated door for rigidity and long life
- Plastic water tank easy for maintenance
- Observation Window with frost free function
- High performance refrigeration system
- Easy user interface for TEMI-880 PLC controller
- One 100mm cable port/ Customer specified
- One shelve, 10 Kg loading & 4 casters included
- Van Type Sirocco,L134,Fan
- PID controlled-Stainless Steel Humidifier
- DuPont R-404A [No Fluorine] Refrigerant / 23 for below -40 °C
- USB port for data output
- Anti-explosive interior lamps
- Data logging chart recorders, paperless recorders stored data in the PLC.
Performance Indicators
Temperature Range RT + 10 ℃ ~ 100 ℃ Humidity 80 ~ 98% R · H fluctuation / uniformity ≤ ± 0.5 ℃ / ± 2 ℃ temperature deviation +2%, - 3% R · H Heating time of about 20min at room temperature ~ 100 ℃ temperature control ± 1 ℃ ± 2%
Control System
Imported microcomputer temperature controller wet integrated controller (display directly percent humidity).
Accuracy range setting accuracy: temperature ± 0.1 ℃, humidity ± 0.1% R · H, indicating accuracy: temperature ± 0.1 ℃, temperature ± 0.1% R · H temperature and humidity sensors platinum platinum resistance · PT100Ω.
Heating system is completely independent system, electric heating nichrome heater.
Isolated external humidification systems, stainless steel boiler type shallow surface evaporative humidifier.
Circulatory system temperature low noise air conditioning motors, leafy centrifugal wind wheel.
Heating System
Far-infrared heating using nickel-chromium alloy heating wire heating speed;
High temperature, low temperature completely independent systems;
Temperature control P · I · D + S · S · R system with channel coordination control;
Temperature control the output power by the microcomputer calculus, to achieve high accuracy and high efficiency power efficiency.
Packaging & Shipping
Simulation Animatronic Customer Triceratops are covered with air bubble film before put them into the wooden case, which not only has good shock absorption, impact resistance, heat sealing and also has the advantages of nontoxic, odorless, moisture corrosion, good transparency etc.
Product Tags:
|
|
PID Control Temperature Humidity Chamber Environmental Test Equipment Images
|
